Troy-bilt 47330 Manuale Utente Scaricare il pdf (Pagina 3)

Section

n Safety

SPARK ARRESTER WARNING TO RESIDENTS OF

CALIFORNIA AND SEVERAL OTHER STATES

Under California law, and under the laws of several

other states, you are not permitted to operate an inter

nal combustion engine using hydrocarbon fuels on any

forest, brush, hay, grain, or grass covered land; or

land covered by any flammable agricultural crop with

out an engine spark arrester in continuous effective

working order.

The engine on the unit is an internal combustion

engine which burns gasoline, a hydrocarbon fuel, and

must be equipped with a spark arrester muffler in con

tinuous effective working order. The spark arrester

must be attached to the engine exhaust system in such

a manner that flames or heat from the system will not

ignite flammable material. Failure of the owner/opera-

tor of the unit to comply with this regulation is a mis

demeanor under California law (and other states) and

may also be a violation of other state and/or federal

regulations, laws, ordinances or codes. Contact your

local fire marshal or forest service for specific informa

tion about which regulations apply in your area.

Shredder Hopper

Inside Dlscherge Opening.

Training

1. Read this Owner’s

Manual and the separate

Engine Owner’s Manual very carefully

before operating this equipment. Be com

pletely familiar with the controls and the

proper use of the equipment. Know how

to stop the unit and disengage the con

trols quickly. A replacement Manual is

available by contacting your authorized

dealer or the Factory.

2. Know where the engine shut-off con

trol is and know how to use it (refer to

Section 3 in this Manual).

3. Never allow children or untrained

adults to use this equipment. Allow adults

to operate the equipment only if instructed

properly.

4. Keep the area of operation clear of all

persons, particularly small children and

pets. Keep bystanders at least 25 feet

from the area of operation.

5. Keep in mind that the operator or user

is responsible for accidents or hazards

occurring to other people, their property

and themselves.

6. Familiarize yourself with all safety and

operating decals on this equipment and on

any of its attachments or accessories.

7. Do not run engine in an enclosed area.

Engine exhaust contains carbon monoxide

gas, a deadly poison that is odorless, col

orless, and tasteless. Do not operate this

equipment near buildings, windows, or air

conditioning equipment.

8. Do not put hands, feet, face, or any

other part of your body or clothing near

the chipper chute, shredder hopper, or

discharge area. The cutting blades begin

to rotate and build up speed once the

engine is running and continue to rotate

for some time after the engine is stopped.

Serious personal injury will occur if con

tact with the blades is made while they are

rotating. Wait for all moving parts to stop

completely.

9. Before inspecting or servicing any part

of the equipment, shut off engine, make

sure all moving parts have come to a

complete stop, then disconnect spark plug

wire from spark plug and move wire away

from the plug.

Preparation

1. The operation of the unit can result in

foreign objects being thrown by high

speed rotating parts. Wear safety approved

eye protection (with side shields) when

using the unit.

2. Do not wear loose-fitting clothing, such

as scarves, which could be caught by

moving parts. Tie up or restrain long hair.

3. Make sure the unit is level and stable

before starting the engine. Operate unit

only on level ground.

4. Do not operate unit on a paved, hard,

or gravel surface. Discharged material

may bounce from a hard surface and

cause injury. Always operate unit on a

level, earthen surface.

5. Each time before starting the unit,

make a visual check to see that all screws,

nuts, bolts and other fasteners are prop

erly secured. The discharge screen (or

the optional bar grate), chipper chute

and all safety covers must be correctly

and securely installed. Disconnect

spark plug wire and move it away from

spark plug before performing this check.

Replace any damaged or unreadable

warning and operating decals.

1 2 3 4 5 6 7 8 ... 26 27

Commenti su questo manuale

Nessun commento

Troy-bilt 47330 Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Attrezzi Troy-bilt 47330