Troy-bilt 47330 Manuale Utente Scaricare il pdf (Pagina 8)

Section

3I Features and Controls

A WARNING

Before operating your machine, carefully read and under-

sfand all safety, controls, and operating Instructions In this

Manual, In the separate Engine Owner’s Manual, and on the

decals on the machine.

Failure to follow these Instructions can result in serious per

sonal injury.

INTRODUCTION

This Section describes the location and function of the main fea

tures and controls on your chipper/shredder. Refer to Section 4;

Operation ior detailed operating instructions.

IMPORTANT: Refer to the separate Engine Owner’s Manual for

detailed information about the controls on the engine.

A DANGER

The cutting blades inside the chipper/shrodder chamber

rotate when the engine is started. Contact with rotating

blades will cause severe personal injury.

Keep hands, face, feet and clothing away from chipper chute

inlet, shredder hopper inlet, discharge opening and dis

charge area at all times.

CHIPPER/SHREDDER FEATURES AND CDNTRDLS

SHREDDER HOPPER (INLET)

The shredder hopper (see Figures 3-1 and 3-1 A) is the opening at

the top of the unit for material to be shredded. Material up to 1/2'

in diameter can be processed through the shredder hopper. In the

shredder chamber, rotating cutting blades shreS the material.

A rubber retainer flap (Figure 3-1 A) is installed at the shredder

hopper opening. Material is pushed past this retainer flap (using

only the leaf tamper supplied with unit) and enters the shredder

chamber. The retainer flap prevents kickback of materialsl Do

not use the unit unless the retainer flap is securely fastened

and is hanging freely inside the hopper opening. Immediately

replace the retainer flap if it is torn or damaged.

A DANGER

Shredded particles can kick back up through the shredder

hopper inlet. The retainer flap is designed to reduce kick-

back of particles and must be in place and securely fastened.

Before using the chipper/shredder, be sure the retainer flap

is securely fastened. Failure to do so can result in serious

personal injury. Also make sure you are wearing protective

and approved safety goggles or g lasses.

RETAINER

FLAPv

SHREDDER HDPPER

CHIPPER

BLADE

SHREDDER

BLADE

DISCHARGE

OPENING

1/4" BETWEEN

SHREDDER BLADES

AND DISCHARGE

SCREEN

Figure 3-1A: Rotating shredder cutting btades cut 1/4"away from

discharge screen—KEEP HANDS AND FEET AWAY from diseharga

area at all times to avoid serious personal Injury.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Commenti su questo manuale

Nessun commento

Troy-bilt 47330 Manuale Utente Pagina 8

Commenti su questo manuale

Prodotti e manuali riguardandi Attrezzi Troy-bilt 47330